Hello , Sign In
Toggle Nav
Get Quote
The Jenco 6360 is a high performance pH/ORP/Conductivity/Salinity/TDS/Temp. handheld meter in a splash proof case with an RS-232C interface that allows it to communicate with any PC. This meter is CE approved and features Conductivity Cells are selectable for 2 wire K=0.1 or 4 wire K=0.475 .Simultaneous test of pH 、EC and temperature measurements.
| Cell Constant | 0.475 (4 Wire) , 0.1 (2 Wire) |
|---|---|
| Conductivity Accuracy | ±0.5% F.S. |
| Conductivity Range | 0.00 uS/cm to 200.0 mS/cm |
| Conductivity Resolution | 0.01 uS/cm; 0.1 uS/cm; 1 uS/cm; 0.01 mS/cm; 0.1mS/cm |
| Operating Ambient Conditions | From 0 to 50 °C, at 90 % RH. |
| Power | 6 X 1.5 Volt AAA batteries or 100 |
| Reference Temperature | From 15.0 to 25.0 °C (key selectable),default 25.0 °C |
| Salinity Accuracy | ±1% F.S. |
| Salinity Range | 0.0 to 80.0 ppt |
| Salinity Resolution | 0.1 ppt |
| TDS Accuracy | ±0.5% F.S. |
| TDS Range | 0.00 ppm to 200.0 ppt |
| TDS Resolution | 0.01 ppm; 0.1 ppm; 1 ppm; 0.01 ppt; 0.1 ppt |
| Temperature Accuracy | ±0.3 °C ±1 digit |
| Temperature Coefficient | From 0.00 to 4.00 %, default 1.91 %. |
| Temperature Range | -5.0 to 100.0 °C |
| Temperature Resolution | 0.1 °C |
| Weight | 470 grams (Including batteries) |
| Memory Storage | 50 sets |
| Output | RS-232 or RS-232 to USB (Modbus) |
| Conductivity calibration | 1 point |
| Dimensions (W x D x H) | 83 x 241 x 71 mm |
| Input impedance | 1013 ohms |
| ORP Accuracy | ±0.1% F.S. ± 1 digit |
| ORP Range | -1999 to 1999 mV |
| ORP Resolution | 1 mV |
| TDS Factor | 0.30 to 1.00, default 0.65 |
| pH Accuracy | ±0.01 pH ± 1 digit |
| pH Buffer Recognition | US (4.01, 7.00, 10.01) or NIST (4.00, 6.86, 9.18) |
| pH Calibration | 2 points |
| pH Electrode Offset (Slope) Recognition | ±100 mV at 7.00 pH or –91.7 to +108.3 mV at 6.86 pH / ±30% at 4.00, 4.01, 9.18 or 10.01 pH. |
| pH Range | -2.00 to 16.00 pH |
| pH Resolution | 0.01 pH |
| pH Temperature Compensation | Auto / manual -5.0 to 100.0 °C |
