Toggle Nav
Toggle Nav
My Account

Hello , Sign In

Please sign in to access your order updates

MEMMERT Peltier-Cooled Incubator IPP1400ecoplus, 1360 L, 0-70°C

$48,136.00
In stock
Overview
SKU
IPP1400ecoplus

MEMMERT Peltier-Cooled Incubator IPP1400ecoplus, 1360 L, 0-70°C

Overview
MEMMERT Peltier-Cooled Incubator IPP1400ecoplus, 1360 L, 0-70°C
Overview

Sets eco standards for cultivation below room temperature: unmatched energy efficiency, best values for heat-up, cool-down and recovery times.

More Information
Altitude of Installation Max. 2,000 M Above Sea Level
Product Type Peltier-Cooled Incubator
Ambient Temperature 16 °C to 28 °C
Autodiagnostic System For Fault Analysis
Calibration Three Freely Selectable Temperature Values
Controlcockpit Twindisplay. Adaptive Multifunctional Digital PID-Microprocessor Controller With 2 High-Definition TFT-Colour Displays.
Convection Forced Ventilation By Peltier Fan
Timer Range 1 min to 99 days
Chamber Volume 1360 L
Dimensions 1435 x 1913 x 905 mm
Interior Dimensions 1250 x 1450 x 750  mm
Door Stainless Steel Doors With Glass Sectors, Fully Heated Inner Glass Panes Integrated In The Full-Sight Glass Door With 2-Point Locking (compression Door Lock)
Exterior Dimensions 1435 x 1913 x 905 mm
Voltage Rating 115 V;230V
Frequency Rating 50/60 Hz
Housing Rear Zinc-Plated Steel
Number of Shelves 4 (Standard);28 (Maximum)
Humidity RH Max. 70 %, Non-Condensing
Installation On Lockable Castors, Adjustable In Height
Weight 345 kg
Internals 4 Stainless Steel Grid(S), Electropolished
Standards Met CE Certified;EAC
Language Setting German, English, Spanish, French, Polish, Czech, Hungarian
Maximum Loading of Chamber 250 Kg
Power Rating 1300 W
Material Zinc-Plated Steel
Maximum Loading Per Internal 30 Kg
Relative Humidity Maximum 70 (Non-Condensing) %
Maximum Number of Internals 28
Net Weight Approx. 345 Kg
Overvoltage Category II
Maximum Loading of Internal 30 kg
Peltier Energy-Saving Peltier Heating-/Cooling System Integrated In The Rear (heat Pump Principle)
Pollution Degree 2
Software Requirement AtmoCONTROL
Programming Atmocontrol Software on a USB Stick for Programming, Managing and Transferring Programmes Via Ethernet Interface or USB Port
Operating Temperature Range 0 to 70 (without Light) °C
Set Up The Distance Between The Wall and The Rear of The Appliance Must Be at Least 15 Cm. The Clearance From The Ceiling Must Not Be Less Than 20 Cm and The Side Clearance From Walls or Nearby Appliances Must Not Be Less Than 5 Cm.
Setting Accuracy Temperature 0.1 °C
Setting Temperature Range 0 to +70 °C
Temperature Sensor 2 Pt100 Sensors Din Class a In 4-Wire-Circuit for Mutual Monitoring, Taking Over Functions In Case of An Error
Timer Digital Backwards Counter With Target Time Setting, Adjustable From 1 Minute to 99 Days
Voltage Electrical Load 230 V, 50/60 Hz ,1300 W~115 V, 50/60 Hz ,1300 W
Volume 1360 L
Working Temperature Range Without Light: From 0 (at Least 20 Below Ambient Temperature) to +70°C
Works Calibration Certificate For +10 °C, +25 °C and +40 °C
Adjustable Parameters Temperature (Celsius or Fahrenheit), Programme Time, Time Zones, Summertime/Wintertime
No Records Found