Hello , Sign In
Toggle Nav
Get Quote
The IonoTrode sensor is designed for applications in ion weak media. The F glass membrane has a very low resistance, therefore the sensor can be used in samples with low conductivity, where it offers highest accuracy over a long period of time
| CIP | No |
|---|---|
| Diameter | 12 mm |
| Diaphragm | Sleeve |
| Electrical Connector | S7 |
| Electrolyte | 3 M KCl |
| Liquid Earth | No |
| Measurement Principle | Combination electrode; pH potential measured against reference |
| Measuring Range | pH 0 to 14 |
| Membrane Shape | Spherical |
| Operating Temperature Range | -10 to 40 °C |
| Pressure Range | 0 to 0.5 bar (higher if side-arm is pressurized) |
| Recommended Storage | Hamilton Storage Solution or 3 M KCl |
| Reference System | Hamilton Everef |
| Sample min Conductivity | 0.2 µS/cm |
| Sensitivity | 57 to 59 mV / pH at 25 °C |
| Sensor Family | IonoTrode |
| Sensor Output | Traditional: mV |
| Serial Number | Yes |
| Steam Sterilizable | No |
| Temperature Sensor | No |
| Wetted Parts | Glass \nEPDM (Ethylene propylene elastomer) |
| Zero Point | 0 ± 20 mV |
| Length | 120 mm |
| pH Glass | Hamilton Type F Glass |
| pH Glass Resistance | Low |
| O-ring Material | FDA 21 CFR 177.2600; EG 1935/2004; USP <87>; USP <88> Class VI (121 °C) |
