Hello , Sign In
Toggle Nav
Get Quote
The FlexiFlow is a flow-through cell. It can be used in all cases where pH or oxygen must be reliably measured in ion-weak media including coolant piping in power generating stations. The sample is fed into the cell from the bottom at a low flow speed, and out of the cell again at the side. A groove cut into the FlexiFlow allows it to easily be attached anywhere with commercially available screws.
| ATEX Approval | No |
|---|---|
| Autoclavable | No |
| CIP | No |
| Diameter | 65 mm |
| For Sensors with | 120 mm, 12 mm, PG13,5 |
| Maximum Pressure | 16 bar |
| Min. Total Length | 175 mm |
| Operating Temperature Range | -10 to 125 °C |
| Process Connection | Swagelok 10 mm |
| Serial Number | No |
| Steam Sterilizable | Yes |
| Wetted Parts | Stainless Steel 1.4435 \nEPDM (Ethylene propylene elastomer) |
| Maximum Diameter | 65 mm |
| Maximum Total Length | 175 mm |
| Weight | 1200 g |
| Internal Volume | Approx. 5.5 mL |
| Mounting | Bottom Screw Mount (4 pcs) |
