 |
|
|
|
Dispersing Tools
|
The variety of media to be processed also requires a variety
of rotor-stator configurations and seals. In many cases it is necessary to
use subsequently two dispersing elements, for pre-crushing and
fine-crushing. The plug-in elements make processing considerably easier.
|
S 50 N – G 45 M |
|
Shaft |
For drive
T… |
With seal or bearing type* |
(G)enerator or (W) tool |
With outer Ř
… (mm) |
Degree of fineness achieved |
|
S |
8 |
N |
- |
5/8 |
G |
|
S |
18 |
N |
- |
10/19 |
G |
|
S |
25 |
N/KR/KV |
- |
8/10/18/19/25 |
G/F |
|
S, R |
50 |
N/KV/KR/KG-HH |
-G/W |
40/45/65/80 |
G/M/F |
|
S |
65 |
KG-HH |
-G |
65 |
G/M/F |
|
*N = PTFE
bearing
KR = Ball bearing with Viton®seal
KV = Ball bearing with vacuum-tight sliding-ring seal with silicon carbide
seal rings
KG-HH = Ball
bearing with sliding-ring seals of hard metal allow with FFPM seal rings
G = coarse
M = middle
F = fine
|
|
|
CAT Homogenizer