Good results start with good sample preparation. Errors caused by analytical instruments are very small compared to the errors associated with sample preparation. The laboratory sample mill is an important, but often overlooked link in the chain of analysis; so important that FOSS TECATOR regards it as an integral part of the analytical system.

The equipment is convenient and safe to use and covers a broad range of grinding applications, ensuring repeatability and reproducibility.

Cylotec 1093

The Cylotec is designed for rapid, uniform grinding of a wide variety of samples such as feeds, grains, chemicals, pharmaceuticals and similar products. The sample is rolled against an inner grinding ring by a rotating impeller and then passed through a screen of variable mesh size.

Knifetec 1095

The Knifetec is designed for the preparations of high fat, high moisture and fibrous samples prior to analysis. The high-speed rotor blade and timer control ensure very fast and reproducible sample preparation. The Knifetec can be connected to a cold-water tap to cool the grinding chamber. This will prevent high-fat samples from sticking to the wall of the grinding chamber.

Cemotec 1090

The Cemotec is specially designed to grind grain and seed samples without losing any of the moisture content. The Cemotec works by grinding the sample between two discs, one stationary and one turning. The distance between the discs can be adjusted to control the fineness of the grist.

Homogenizer 2094 and 2096

The Homogenizer is designed for macerating and homogenizing high-moisture, high-fat and fibrous samples. Reproducibility is achieved through the use of a built-in timer. The Homogenizer comes with two different rotors with smooth and scalloped blades.