Home Products Specials Suppliers Service Shows Employment    
Search


Chemical Analysis

Kjeldahl OverviewApplications
Product Range
Kjeldahl 2100
Kjeldahl 2200
Kjeldahl 2300
Kjeldahl 2400

Digestion Blocks

Systems
2015 Lift System
Control Systems
Unattended
Fume Removal

Digestion Tubes
Condensers
Kjeltabs
2001 Scrubber

Soxtec Overview
Avanti
2043 System
2047 Soxcap

Fibertec Overview
2010 System
M6 & M12 System
2023 & 2021
System E

Sample Mills
Cemotec®1090
Cyclotec®1093
Homogenizers
1095 Knifetec
FIAstar 5000



 

 

 

 

 

Digestion Blocks: A Brief Overview

Digestion Blocks are designed to be used when wet acid ashing or digestion is required as a sample preparation technique. Most common is the sulfuric acid digestion required for determination of Kjeldahl nitrogen/protein or of total phosphorus. Digestion Blocks can also be used where acid digestion is required prior to trace metal analysis.
All systems are equipped with a built-in electronic temperature control, 100-440ºC, digital display and are compatible with Series 2000 Controller. All systems include tube stand, heat shields and washing plate.
Systems should be combined with appropriate digestion tubes and Exhaust Manifold to make complete system.

Digestion Tubes   All 6-Place and 20-Place digestion blocks use 250 ml digestion tubes. All 12-place and 40-place blocks use 100 ml tubes. For most Kjeldahl applications the 250 ml tubes are used.
  
Exhaust Manifold Most digestion applications, such as Kjeldahl, produce unpleasant and corrosive fumes. Exhaust Manifolds transfer these fumes to either a cold water drain or a scrubber unit. Exhaust Manifolds come complete with a water faucet aspirator but may be connected to a flow regulator or a scrubber.
 
Scrubber   The Scrubber pulls the acid fumes from the Exhaust Manifolds and neutralizes them in a self-contained system for minimal acid discharge into the sewage system. The collected fumes are neutralized by a sodium hydroxide solution that may be easily disposed.
 
Controller    All 20 Place and 40 Place digestion blocks come with a Controller, which is optional on all other blocks. The controller allows for nine programmable temperature and time combinations in sequence. Powered from the Digestor, fully unattended operation is possible if a Controller is used with an exhaust, flow regulator or scrubber, and a lift system.
  
Lift System The Lift System eliminates heavy and risky manual handling of hot chemicals by moving the rack of tubes with the exhaust into and out of the heated digestion block. It also saves bench space as the Exhaust Manifold can be mounted on it.